SRP bills · East Valley

How to Read Your SRP Bill and What Solar Changes on It

A section by section guide to the Salt River Project bill for homeowners in Gilbert, Mesa, Chandler, Tempe and Queen Creek, and the new lines that show up once rooftop solar is connected.

Black solar panels on the metal roof of a single story home
Recent solar projects.

Learning how to read your SRP bill is the most useful thing a Gilbert, Mesa, Chandler, Tempe, Queen Creek or San Tan Valley homeowner can do before talking to anyone about solar. The bill already holds what a solar proposal is built on: your price plan, your kilowatt-hours, and a long history of how your use moves between summer and winter. This guide follows the way SRP lays out its own guide to reading a residential electric bill, then shows what changes once panels are connected.

First, confirm the bill is from SRP

In the East Valley, the company on the bill is not always Salt River Project. The Town of Gilbert lists both SRP and Arizona Public Service on its residential utilities page, and the City of Chandler points residents with electricity questions to both on its energy conservation page. Most of Mesa is SRP, but a downtown area of about 5.5 square miles is served by the City of Mesa electric utility, which runs its own solar program. Most Tempe homes are on SRP, which has its headquarters on Mill Avenue in Tempe, and some Tempe addresses are on APS. The Town of Queen Creek lists SRP for electricity on its resident resources page.

So start with the logo and the company name at the top of the bill. If it says APS, our guide on how to read your APS bill is the one to follow.

What you will see on every SRP bill

SRP says every residential bill carries the same core sections, whatever the price plan, with full color energy history graphs and a blue box around the key information. Here is where to look and what each section tells you.

  1. Key informationThe blue box in the upper right corner. It shows your service period, the due date, the amount you currently owe and your account number.
  2. Customer informationYour service address and your price plan. SRP notes that the plan named here is the one used to calculate your bill. Write it down, because a solar conversation starts from it.
  3. Meter informationThe total energy used in the billing period, in kilowatt-hours (kWh), with the current and prior meter readings.
  4. Energy historyA bar graph of up to 36 months of kWh. For solar planning this is the most valuable part of the bill, because it puts the summer peak and the winter dip side by side.
  5. ComparisonA table with the days in the billing period, daily kWh, daily cost and average daily temperature for this month, last month and the same month last year.
  6. Account summaryCurrent charges, discounts, previous charges, payments, the balance due, and local and state taxes.
  7. Message for youNotes about your account and SRP programs. On a time of day plan, SRP shows your savings from that plan here.

The two charges on every SRP bill

SRP describes two charges that appear on every residential bill. The monthly service charge falls into one of three tiers, depending on the size of your home and your energy use, and helps cover customer service, billing and your connection to the grid. The energy charge is variable. It covers buying or producing the electricity used in the billing period, along with the transmission, generation and distribution capacity needed to supply it, so it moves month to month with your kWh.

SRP lists four factors behind its price per kWh: the base rate, the Fuel and Purchased Power Adjustment Mechanism, the Transmission Cost Adjustment, and your price plan. Plans range from the Basic Price Plan, with one flat rate per kWh at any hour, to time of use plans with on-peak, off-peak and super off-peak periods. We do not quote SRP prices on this site. SRP publishes them on its own pages.

Want us to look at your bill for free? Get a Free Quote

Pull a year of kWh before you talk about solar

One July bill overstates your use and one January bill understates it. Use the energy history graph, or your bills from the past year, to collect 12 months of kWh. Then enter them in the Verix Energy bill analyzer. It can read the kWh from an SRP bill in your browser, without uploading the file, and it returns an estimated system size range. It uses kWh only. It does not use the amount due, and it does not estimate savings.

What changes on your SRP bill with solar

“A common misconception is that rooftop solar customers won’t receive an SRP bill of any kind.”

SRP, SRP solar price plans

Solar does not end the SRP bill. On its solar price plans page, SRP says solar customers typically continue to rely on SRP for around two thirds of their electricity needs. The house still draws from the grid at night and any time the panels produce less than the house is using. SRP also says that bill savings from solar are unrelated to what the panels cost, and that whether one exceeds the other depends on factors such as how the panels perform and what you paid.

The larger change is the price plan. SRP’s solar and demand price plans page lists six plans for homes with rooftop solar:

  • Conserve 6 to 9 p.m. and Save, Solar: on-peak hours are 6 to 9 p.m. on weekdays, year round, and super off-peak hours are 8 a.m. to 3 p.m. every day. Excess solar is credited at an export rate. SRP’s plan page lists an energy charge and a monthly service charge.
  • Manage Demand 5 to 10 p.m. and Save, Solar: on-peak hours are 5 to 10 p.m. on weekdays, year round, with the same 8 a.m. to 3 p.m. super off-peak window. Excess solar is credited at an export rate. It has a monthly demand charge based on the average of each day’s highest 60 minute on-peak interval, according to SRP’s plan page.
  • Customer Generation: net metering, where excess kWh is subtracted from delivered kWh, plus a monthly demand charge. SRP bills it on the highest 30 minute on-peak interval in the month.
  • Average Demand: net metering plus a monthly demand charge, measured in 30 minute on-peak intervals. SRP averages the daily maximum on-peak demands over the month, so one spike counts for less.
  • Time-of-Use Export and Electric Vehicle Export: no monthly demand charge. Energy the house does not use is exported to SRP and credited to the bill at a fixed export price that SRP publishes.

SRP says on the Customer Generation and Average Demand plan pages that both plans will be discontinued as of the November 2029 billing cycle. SRP also describes options to move from a fixed export price to market based pricing, and a path to a capacity credit in addition to the energy credit. Which plan fits depends on how and when the house uses power. Verix Energy does not choose the plan for you, and the bill on any plan is SRP’s to calculate.

Reading a Customer Generation or Average Demand bill

SRP’s bill guide walks through two solar bill layouts: the demand plans just above and the two export plans below. It does not show a separate sample for Conserve 6 to 9 p.m. or Manage Demand 5 to 10 p.m., so for those two, check the plan pages linked above and the plan named on your own bill.

Two terms appear on a demand bill that a standard bill does not have. Demand, in kW, is the maximum rate at which the home used electricity during the billing period. The demand charge covers part of the cost of transmission and distribution capacity and varies with the demand your account placed on the system. On Customer Generation, SRP bills the single highest 30 minute interval during on-peak hours. On Average Demand, SRP takes the highest 30 minute on-peak interval of each day and averages those daily maximums over the month. On-peak hours for both plans are weekdays from 2 to 8 p.m. May through October and 5 to 9 a.m. and 5 to 9 p.m. November through April, excluding weekends and six observed holidays.

The bill also adds sections:

  • Demand history: a second graph with 36 months of demand history.
  • Customer generated power: the energy your system produced during on-peak and off-peak hours.
  • Metered energy: the energy you bought from SRP or sold to SRP during on-peak and off-peak hours. Negative numbers are kWh sold to SRP. On-Peak kW Max is the highest demand during on-peak hours, and Average Demand customers also see On Peak kW Avg.
  • Energy consumed offset by energy you generated: the share of your energy your system supplied. Above 100 percent means SRP purchased excess energy.
  • Total energy consumption: the current calendar year by month, counting the energy you generated plus SRP energy.

Reading a Time-of-Use Export or Electric Vehicle Export bill

  • Export energy: a bar graph of up to 36 months of export kWh, the solar energy your home did not use.
  • Meter information: the kWh delivered by SRP, the energy exported to the grid, and your on-site generation.
  • Total household energy use: on-site generation, minus export, plus energy delivered by SRP.

That last line is the one to compare with your bills from before solar. The delivered kWh alone will look much smaller than what the house actually uses, because part of the home’s use now comes straight from the roof.

SRP rules that come before the first solar bill

A few SRP requirements in the residential distributed energy requirements and the residential interconnection process shape the timeline:

  • M-Power, SRP’s prepay program, is not compatible with customer generation metering. SRP unenrolls the account from M-Power when a customer generation price plan starts.
  • SRP allows six months from the application for the system to be installed and interconnected.
  • If the design includes a battery, SRP wants it charged at the final inspection.
  • The system should not run beyond testing until SRP’s final inspection and its permission to operate letter.
  • For new construction, common around Queen Creek, SRP tells homebuilders that an active SRP account has to exist at the site before the application can continue.

A standard grid-tied system without a battery shuts off when the grid goes down. A battery with backup equipment can keep selected circuits on. Some inverter setups can also power a few selected circuits in daylight without a battery, using dedicated backup equipment and only while the panels produce enough, as one manufacturer describes in its sunlight backup guide. The battery page explains backup.

City notes for East Valley SRP homes

The SRP bill reads the same in every city. The paperwork around it does not. Each city page goes deeper.

SRP and APS

Gilbert

The town lists both utilities, and two nearby streets can land on different companies. The town water bill is not the electric bill.

SRP and City of Mesa

Mesa

If the bill says City of Mesa, the SRP plans above do not apply. The city’s solar application has to be accepted before installation starts.

SRP and APS

Chandler

The city sends electricity questions to both utilities. The City of Chandler permit is separate from the utility’s permission to operate.

Mostly SRP

Tempe

Some addresses are on APS. Tempe Building Safety accepts SolarAPP+ designs for eligible rooftop jobs.

SRP listed by the town

Queen Creek

A Queen Creek mailing address can sit outside town limits, and some nearby addresses are on APS. The bill settles it.

Mostly SRP

San Tan Valley

Most bills show SRP, and some addresses, mainly toward the south, are on APS. SRP’s service territory lookup checks a specific address.

Not sure which company serves your street? Our post on which utility serves your city covers all 12 cities we work in.

Your next step

Have the last year of SRP bills, or the energy history graph, in front of you. Run the kWh through the bill analyzer, then call or text 480-406-3127. Verix Energy is based in Gilbert. We read the bill with you and explain the SRP plan choices. Verix Energy does not install the equipment. Savings vary by home, and no specific savings are guaranteed.

Sources

  1. SRP, How to read your residential electric bill
  2. SRP, SRP solar price plans
  3. SRP, How to save on solar and demand price plans
  4. SRP, Customer Generation Price Plan and Average Demand Price Plan
  5. SRP, Conserve 6 to 9 p.m. and Save, Solar and Manage Demand 5 to 10 p.m. and Save, Solar
  6. SRP, Residential distributed energy resource program requirements (PDF)
  7. SRP, Residential distributed energy interconnection process (PDF)
  8. SRP, Contact us (headquarters address)
  9. Town of Gilbert, Utilities
  10. City of Mesa, Electric
  11. City of Chandler, Energy conservation
  12. Town of Queen Creek, Resident resources

Checked November 6, 2026. Utility pages change; the current version on the utility’s site governs.

Keep reading

Bring the bill. We will read it with you.

Start with the bill analyzer, then call or text 480-406-3127. Open 7 days, 7 AM to 9 PM.